Skip to content

Air conditioning maintenance checklist for split and ducted systems

The split and ducted service checklist, how often to service, what goes on the service sheet, and how to price and remind maintenance customers before summer.

An air conditioning technician on a stepladder lifting the front cover off a split system head unit in a sunlit Australian living room
On this page
  1. What goes on an air conditioning maintenance checklist?
  2. Who is allowed to work on the refrigerant?
  3. How often should an air conditioner be serviced?
  4. What should you record on the service sheet?
  5. When should you book pre-summer services?
  6. How do you set up an air conditioning maintenance agreement?
  7. How do you price an air conditioning maintenance agreement?
  8. How do you remind customers their next service is due?
  9. What about the calls you can't answer in a heatwave?
  10. Questions

An air conditioning maintenance checklist covers the same ground on every visit: clean or replace the filters, clean the indoor and outdoor coils, flush and test the condensate drain, check the electrical connections and the fan, measure how the system is performing, and leave anything on the refrigerant circuit to a tech holding an ARC refrigerant handling licence. Write it all down on a service sheet, set the next due date, and the customer is booked before they think to ring someone else.

Below is a split system and ducted checklist you can use on site tomorrow, how often each kind of unit should be serviced, what to put on the service sheet, and how to price and run maintenance agreements so the work comes back every year. It's November, so the pre-summer rush is on. The jobs you book this fortnight carry you through the first heatwave.

What goes on an air conditioning maintenance checklist?

A good air conditioning maintenance checklist has four parts: the indoor unit, the outdoor unit, the electrical side and a performance check. Each item gets a tick, a note or a photo, so the next tech knows what was found. Split systems and ducted systems share most of the list, but ducted adds the return air filter, the ductwork, the zones and the unit in the roof space.

Split system service checklist

  • Isolate the power and confirm it's off before you open anything
  • Remove and wash the filters, or replace them if they're damaged
  • Inspect and clean the indoor coil and the blower wheel
  • Clean the louvres, the cover and the drain tray
  • Flush the condensate drain and check it runs freely to where it should discharge
  • Clear leaves and rubbish from around the outdoor unit and check the mounting and pad
  • Clean the outdoor coil and check the fins for damage
  • Check electrical connections, isolator and cabling for heat damage or loose terminals
  • Check the fan motors run quietly and the indoor fan changes speed
  • Run it in cooling and heating, and record supply and return air temperatures
  • Test the remote and the timer, and change the remote batteries if they're flat
  • Note anything the customer needs to know, with a photo

Ducted system service checklist

  • Isolate the power at the indoor and outdoor units
  • Clean or replace the return air filter and check the grille seals
  • Inspect the indoor coil, drain tray and blower in the roof space
  • Flush the condensate drain and check the safety tray, if fitted
  • Walk the ductwork you can reach for split, crushed or disconnected runs
  • Check each zone damper opens and closes from the controller
  • Measure airflow and temperature at the outlets in each zone
  • Clean the outdoor coil and check the electrical connections
  • Check the controller, sensors and thermostat read correctly
  • Record the unit's make, model and serial, and photograph the data plate

The customer can do some of this between visits. Show them how to wash the filters on a split system, and the coil stays cleaner until you're back.

Who is allowed to work on the refrigerant?

In Australia, anyone who works on refrigeration and air conditioning equipment with a fluorocarbon refrigerant needs a refrigerant handling licence from the Australian Refrigeration Council. That covers putting gauges on, leak testing, recovering and recharging. A business that buys, sells or stores refrigerant also needs a refrigerant trading authorisation. An apprentice or a general hand can clean filters and coils, but not touch the circuit.

The ARC's refrigerant handling licence page explains the licence types, including trainee licences, and its trading authorisation page covers the business side. Put the licence number of the tech who did the refrigerant work on the service sheet, every time.

If a split system is short of gas, it has a leak. Find it and fix it, and record how much refrigerant you recovered and added. Topping up and leaving is how the same customer rings you in February with a warm house.

How often should an air conditioner be serviced?

Most manufacturers ask for a professional service at least once a year on a home system, with the owner cleaning the filters more often in heavy use. Commercial systems run longer hours and usually need servicing more often, which the maintenance agreement sets. The manufacturer's manual for the unit is the rule to follow, because its warranty terms may depend on it.

Unit and useTypical service intervalBetween services
Home split system, normal useOnce a year, before summerOwner washes filters every few weeks in heavy use
Home ducted systemOnce a year, before summerOwner checks the return air filter
Home system running cooling and heatingTwice a year, before summer and before winterAs above
Office, shop or clinicQuarterly or six-monthly, set in the agreementFilters on each visit
Kitchen, gym, dusty or coastal siteMore often, set by what you find on siteFilters and coils checked each visit

Treat the table as a starting point for the conversation. A rental with three tenants a year needs a different plan from a retiree's bedroom unit. Look at the filter on the first visit, then set the interval from what you saw.

What should you record on the service sheet?

The service sheet is the record of what you checked, what you found and what you did, for each unit on the site. It protects you when a unit fails a month later, it backs up the customer's warranty, and it tells the next tech exactly where to start. Write it on site, not that night, with photos.

On every service sheet:

  • the date, the tech's name and their ARC licence number if they worked on the refrigerant
  • the site address and where each unit is (master bedroom, roof space, side of the garage)
  • make, model, serial number and refrigerant type for each indoor and outdoor unit
  • each checklist item marked done, with a note where something was off
  • supply and return air temperatures, and any pressures or amps you measured
  • refrigerant recovered or added, in kilograms
  • faults found and what you recommend, with a price if you've quoted it
  • before and after photos of the filters and coils
  • the customer's signature and the next service due date

When should you book pre-summer services?

Book pre-summer services from September through November, before the first run of hot days. Once a heatwave hits, breakdown calls take the diary and maintenance customers get pushed back. Contact everyone due for a service before February now, offer them a time this month or early December, and keep a few slots each week free for breakdowns.

The pre-summer fortnight

  1. Pull the list.

    Every maintenance customer and every customer you serviced last spring.

  2. Send the reminder.

    A text or email with the service, the due date and a way to book.

  3. Fill the quiet days first.

    Offer the times you most need filled before anyone gets to pick a Saturday.

  4. Group by suburb.

    Two services in the same street beat two services forty minutes apart.

  5. Leave room for breakdowns.

    Hold back part of each day for the calls a hot spell brings.

  6. Book the next one before you leave.

    Set the next due date on site, while the customer is standing there.

How do you set up an air conditioning maintenance agreement?

An air conditioning maintenance agreement is a written arrangement to service a customer's units at a set interval for a set price. It should list the units covered, how many visits a year, what each visit includes, what costs extra, how and when you invoice, how long it runs and how either side ends it. One page is enough for a house.

Put these in writing:

  • The units. Each one by location, make and model, so a unit added later is priced separately.
  • The visits. How many a year and roughly when, such as October and April.
  • What's included. Your checklist, by name. Attach it.
  • What isn't. Parts, refrigerant, repairs, after-hours call-outs, and access equipment for units you can't reach from a ladder.
  • Priority. Whether agreement customers jump the queue for breakdowns in summer. It's the thing most customers sign up for.
  • Payment. Per visit, or yearly in advance.
  • Term and review. Twelve months, with the price reviewed each year.

How do you price an air conditioning maintenance agreement?

Price an air conditioning maintenance agreement from your own charge-out rate: the time on site per unit, plus travel, plus consumables, multiplied by the number of visits, then GST if you're registered. Don't start from what the business down the road charges. Start from what an hour of your time costs, so every visit makes money.

If you haven't worked out your charge-out rate, our guide to how to price a job walks through it step by step. Then do the sum below. The numbers are examples to show the working, not market rates. Put your own in.

LineExample workingExample amount
Labour3 split systems at 45 minutes each = 2.25 hours at $120 an hour$270
Travel30 minutes at $120 an hour$60
ConsumablesCoil cleaner, drain treatment, filters as needed$25
Each visit, before GST$270 + $60 + $25$355
GST at 10 percentOnly if you're registered$35.50
Each visit, with GST$390.50
A year at two visits2 x $390.50$781

Two things change the sum. Commercial sites add induction time, sign-in, roof access and sometimes after-hours work, so price each of those as its own line. And agreement customers are worth a sharper rate than one-offs, because their visits are booked in months you'd otherwise be quiet. If you give a lower rate, give it for the commitment, and keep the parts and refrigerant at your normal margin.

You must register for GST once your GST turnover reaches $75,000 a year. The ATO's registering for GST page has the detail.

How do you remind customers their next service is due?

Remind customers two to three weeks before the service is due, by text or email, with the service name, the due date and a way to book. Send it on a schedule rather than when you remember, and send it to every maintenance customer, not just the ones you think of. A reminder that goes out on time is most of what keeps an agreement renewing.

Keep the message short and plain. Something like this:

Service reminder text

Hi Sarah, your split system service with Coastal Air is due on 12 Dec. Book a time here and we'll confirm it.

Then remind them again before the visit, so you don't arrive to a locked house. A sticker on the unit with the next due date helps too, and costs a few cents.

The diary and the spreadsheet

  • Services due listed in a spreadsheet nobody opens in summer
  • Ring or text each customer one by one
  • Service sheet on paper in the ute
  • Next due date depends on someone writing it down

With Galaxera

  • Upcoming services on your Home
  • Reminders go out by text or email ahead of each due date
  • Checklist, notes and photos on the job, on site
  • Next due date counted from the finished job

What about the calls you can't answer in a heatwave?

In a heatwave the phone rings while you're on a roof with your hands full. Every call that goes to voicemail is a breakdown, a new maintenance customer or an install, and plenty of callers ring the next business rather than leave a message. Have the calls answered, and get the job, address and urgency written down, so you ring back knowing what you're walking into.

Galaxera's AI receptionist rings your mobile first, then answers in your business name. It asks what the job is, where and how urgent, and texts you the rundown when the call ends. Turn booking on and connect Google Calendar and it books a free time on the call. If a caller asks what a service costs, it gives the starting prices on your price list, never a total. Our post on AI receptionists for tradies goes through how it handles a call.

If your maintenance base lives in a spreadsheet, put this summer's services into Galaxera and see how many come back on their own. Start your 14-day free trial, add your services and your customers' due dates, and send the first reminders this week.

Questions

Most manufacturers ask for a professional service at least once a year, ideally before summer. Systems that run cooling and heating hard, or sit in dusty or coastal spots, need it more often. The unit's manual is the rule to follow.

Anyone who works on the refrigerant circuit, such as connecting gauges, leak testing, recovering or recharging, needs a refrigerant handling licence from the Australian Refrigeration Council. Electrical work also needs the right electrical licence for your state.

Filters cleaned or replaced, indoor and outdoor coils cleaned, the condensate drain flushed and tested, electrical connections and fans checked, a performance check with supply and return air temperatures, and a service sheet with photos and the next due date.

Work from your own charge-out rate: time on site per unit plus travel, plus consumables, multiplied by the visits a year, then GST if you're registered. Price parts, refrigerant, repairs and after-hours work separately.

September to November. Book maintenance customers before the first hot spell, because once breakdown calls start the diary fills and services get pushed back.