AI quoting software drafts a quote from what the customer asked for, prices each line from your own price list, and hands it back for you to check and send. It does the typing. You still decide the price, the scope and whether the job is worth having.
That's the short answer. The longer one matters, because the worry most tradies have is a fair one: what happens when the AI gets it wrong, and who wears it? Below is how AI quoting works step by step, where the numbers come from, what you check before anything leaves, and what any quoting software in Australia should handle. For the wider picture of what AI can take off your plate, start with AI for tradies.
Can AI write my quotes for me?
AI can write the draft of your quote, not the decision. Give it the job in plain words, talked through on the drive home, from an email or from your own notes, and it turns that into line items with quantities, matched to the services and materials you already sell. Good AI quoting software then prices those lines from your price list, leaves a gap where it has no price, and waits for you. Nothing reaches the customer until you send it.
Think of it as a new office hand who's quick on the keyboard and knows your price list, but has never been on one of your jobs. You'd let them write it up. You wouldn't let them post it without a look.
How does AI quoting software work, step by step?
AI quoting runs in a set order: the job comes in, the AI breaks it into lines, your price list fills in the numbers, and you check and send. The AI reads and writes. The pricing is a lookup against figures you set, so the same line costs the same on a Friday arvo as it did on Monday morning.
From enquiry to sent quote
The job comes in.
A customer rings, emails or stops you at the gate. You end up with words: replace six downlights with LEDs and add a double power point in the garage.
The AI reads it.
It works out what the work is, picks your saved template if one clearly matches, and lists any extra materials with how many are needed.
Your prices go on.
Each line is priced from your price book, your template or a quote you sent before. A line with no match is left blank and marked as needing a price.
Questions come back.
Anything the quote needs that the customer didn't say, like a ceiling height, a model or access, comes back as a question to ask them.
You check it.
Fix a quantity, fill a blank, tidy the scope wording.
You send it.
As a link by email or text. The customer opens it on their phone and accepts online.
The step people skim past is the fourth one. Plenty of bad quotes start with an assumption nobody checked. Software that asks "single or double storey?" instead of picking one is doing you a favour.
What can AI quote from: a call, notes or a plan?
Most AI quoting starts from words: what the customer said on the phone, what they wrote in an email, or what you type or say after the site visit. Quantities off a drawing work differently. You mark the plan in a takeoff, and the counts, runs and areas carry onto the quote as lines priced from your rates.
| Where the job starts | What the quote gets |
|---|---|
| A phone call | The caller's name, address, the job and when suits, written down to quote from |
| An emailed enquiry | The customer's own words, drafted into lines |
| Your notes after the site visit | Typed or pasted in, drafted into lines |
| Talking it through in the ute | A draft saved while you drive, read back to you |
| A PDF or DWG plan | Counts, runs and areas you mark on the drawing |
| A roof address | Each roof face with its area and pitch, ready to price per square metre |
Photos still matter, they're just for you. A photo of the switchboard or the cracked ridge capping tells you what you're walking into before you put a number on it, and it can go on the quote so the customer sees what you're pricing.
Where does the price come from?
In AI quoting software you can trust, the price comes from you: your price book, your saved templates, your cost plus your markup, or what you charged last time for the same line. The AI shouldn't make up a rate. When nothing you've set matches a line, the right answer is a blank marked as needing a price, not a number pulled from somewhere else.
This is where tools differ most, so ask any app you trial one question: where did this number come from? A good one tells you, line by line. Here's the downlight job from above, drafted against a sparky's own price list:
| Line on the draft | Where the price came from |
|---|---|
| LED downlight swap, labour | Your saved template for that job |
| LED downlight, 6 | Your price book |
| Double power point, supply and install | A quote you sent last month |
| Cable to the garage | Needs a price |
And under it, two questions for the customer: is the garage attached to the house, and roughly how far is it from the switchboard? Put your own rate and your own fittings in and the shape is the same. Labour comes from your template, materials from your book, and the one line nothing matched waits for you.
How does it learn what I charge?
In Galaxera, price memory looks at quotes it drafted that you went on to send. It matches on the wording of a line, not an exact string, so "swap downlights to LED" finds "LED downlight replacement". Recent prices count for more: one from three months ago carries about half the weight of one from this week. A price on a quote the customer accepted is lifted, and one on a quote they declined counts for much less. The more you quote, the closer the drafts get to what you'd have written.
What do I still check before the quote goes out?
You check everything the customer will hold you to: the scope wording, every quantity, every blank price, the labour, the exclusions and the valid-until date. AI drafting cuts the typing, not your responsibility for the number. A few minutes reading a draft beats an hour at the kitchen table, but skip the read and you're stuck with a price you never looked at.
- The scope says what you'll do, and what you won't
- Every quantity matches what you saw on site
- Every line that needs a price has one, or is gone
- The labour covers the real job: access, travel, the old fitting that won't come out
- The customer's questions are answered, or written in as an assumption
- GST is right for your registration
- The deposit and the valid-until date are what you want
- The customer's name, site address and contact are right
Will AI stuff up my quote?
It can, if it's allowed to guess. The real risk with AI quoting is a confident number nobody checked: a made-up rate, a quantity the customer never gave, a labour figure out of thin air. Quoting software built for trades closes those gaps. The AI never sets the price, blank lines stay blank, missing details come back as questions, and nothing is sent without your yes.
The other half is what no software can know. What's behind the plaster, how tight the roof space is, whether the customer will change their mind three times. That's trade judgement, and it's why you read the draft.
The fair test is your own work. Take five jobs you've already quoted by hand, run each one through AI drafting, and compare line by line. Where it's close, you've saved the typing. Where it's off, it's usually a gap in your price list, and fixing that once fixes every quote after it. Our guide on how to quote a job covers what a good quote needs either way.
Quoting at 9 pm
- Find the notes from the site visit
- Type every line from memory
- Look up last month's price for the same fitting
- Work out GST and the total
- Email a PDF and hope it gets opened
Drafting with AI
- Paste the enquiry or say the job in the ute
- Lines come back priced from your own list
- Fill the one blank, answer the one question
- GST and the total are already on it
- Send a link they accept on their phone
Will the customer know AI wrote it?
The customer gets your quote, not the AI's. It goes out with your business name, logo, ABN, terms and validity date, as a link by email or text, and every line on it is one you've read. How it was typed is your business, the same way nobody asks whether you used a template or a spreadsheet. What they'll notice is that it turned up the same day.
The phone is a different matter. A customer who asks an AI receptionist what a job costs should get your listed starting price for that service and nothing more. Galaxera's receptionist never puts a total on a job it hasn't seen. It takes the details, gives the starting price on your list if asked, and leaves the quote to you. More on that in AI receptionists for tradies.
What should quoting software in Australia handle?
Quoting software in Australia should apply GST from your registration, print your ABN and licence, state a deposit and a valid-until date, let the customer accept online, and handle extra work as a variation the customer agrees to in writing. The AI is a bonus on top. If the quote itself isn't right for Australian rules, a faster draft only gets a wrong quote out sooner.
| What it should do | Why it matters |
|---|---|
| GST from your registration | Registered, the total shows the GST in it. Not registered, no GST is charged |
| Your ABN and licence number | business.gov.au lists your business name, ABN and contact details as basics of a written quote |
| A valid-until date | Last winter's price can't be accepted next spring |
| The deposit on the document | The customer agrees to it along with the price |
| Online acceptance with a signature | Agreement in writing, without a printer |
| Variations | Extra work is priced and agreed before you do it |
| Quote to job to invoice | The accepted lines become the invoice, nothing typed twice |
A quote isn't a tax invoice, but the invoice it turns into is. The ATO's tax invoice rules say a sale of $1,000 or more also needs the buyer's identity or ABN on it, so get the customer's details right at the quote. Our guide to tax invoice requirements goes through the rest.
Variations are where quotes leak money. In Galaxera you add a variation to an accepted quote and it becomes its own quote, numbered after the original, with a VO suffix. It's sent and accepted on its own, and the price the customer first signed stays as it was.
How do I get started with AI quoting?
AI quoting is only as good as the price list behind it, so start there. Load your rate, your common services and the materials you use every week. Save your most common jobs as templates with the labour in them. Then draft your next ten quotes with AI, check each one properly, and see how many you'd have sent as they came back.
- Your hourly rate and call-out fee
- The ten services you quote most, with prices
- The materials you buy every week, with your cost and markup
- Templates for your top three or four jobs, labour included
- The next ten quotes: draft, check, send
The 14-day free trial needs no card. Load your prices on the first afternoon, draft the next quote that comes in, and judge it on a real job.
Questions
It can write the draft. You give it the job by talking it through, from an email or from your notes, and it lists the lines and quantities and prices them from your own price list. You check it and send it.
It shouldn't. In Galaxera the AI never sets a price: every line is priced from your price book, your template, your cost at your markup or a quote you sent before, and a line with no match is marked Needs a price.
No. If a caller asks, it gives the starting price on your price list for that service, never a total. It takes the job details and the quote comes from you.
Quantities off a drawing come from a takeoff. In Galaxera you mark counts, runs and areas on a PDF or DWG plan, or measure a roof from its address, and they go onto the quote priced from your rates.
They get a quote from your business, with your logo, ABN, terms and validity date, and every line on it is one you've checked before sending.



